Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Taromid B 280 G6 X0 - PA6-GF30 - Taro Plast S.p.A.

Material Data Center offers the following functions for Taromid B 280 G6 X0:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Taromid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 9500 MPa ISO 527
Tensão na ruptura 130 MPa ISO 527
Deformação na ruptura 2.2 % ISO 527
Módulo de flexão, 23°C 8700 MPa ISO 178
Resistência ao impacto Charpy, +23°C 40 kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 8.2 kJ/m² ISO 179/1eA
ASTM Dados
Impacto Izod com entalhe, 1/8 in 86 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 222 °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 208 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 216 °C ISO 306
Temperatura de amolecimento Vicat, B 212 °C ISO 306
Coef. de expansão térmica linear, paralelo 32 E-6/K ISO 11359-1/-2
ASTM Dados
UL94 flamabilidade V-0 - UL 94
Espessuras do tubo de teste 0.97 mm -
Índice de oxigênio 32 % ASTM D 2863
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica >1E13 Ohm*m IEC 62631-3-1
Índice comparativo de linha de fuga 400 - IEC 60112
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 6 % Sim. to ISO 62
Densidade 1570 kg/m³ ISO 1183
Características
Características especiais
Retardante de chama, Estável contra o calor
Características
Baixo odor
Aplicaciones
Automóvel, Elétrica e Eletrônica
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.